Children’s Patterns – Knitted Rib Scarf Set













kidsribscarfset

Instructions are for small size. Changes for large size are in parentheses.

Materials: 4 ply knitting worsted weight yarn
8 ounces for scarf, 4 ounces for hat and mittens
knitting needles No. 6 and No. 8 or size to give gauge.

Gauge ( #8 needles): 11 sts = 2″; 7 rows = 1″

SCARF
Approx 6(8)” X 50(66)” without fringe

With No. 8 needles cast on 35(43) sts.
Row 1 (right side): K 1, * with yarn at back, sl 1 as to P, P 1, K 1, P 1; rep from *, end sl 1, K 1.
Row 2: K 1, P 2, * K 1, P 3; rep from *, end K 1, P 2, K 1.
Rep these 2 rows to 50(62)” from beg or desired length.
Bind off in pat.
Fringe: Cut five  8″ strands for each fringe.
Space 9 fringe evenly on each end and knot.

CAP

Cuff: With No. 8 needles, cast on 75(83) sts. Work pat as on scarf for 2″ end on right side. K next row for turning ridge. Beg with Row 2 (to reverse right and wrong side) work to 5(6)” from turning ridge; end with Pat Row 2.
First Dec Row: K 1, * sl 1, K 2 tog, psso the 2 tog, P 1, sl 1, P 1, K 1, P 1; rep from *, end sl 1, K 1.
Next Row: K 1, P 2, * K 1, P 5; rep from *, end last rep P 4, K 1.
2nd Dec Row: K 1, * sl 1, P 1, sl 1, K 2 tog, psso, P 1, rep from *, end sl 1, K 1.
Next Row: K 1, * P 1, K 1; rep from * to end.
3rd Dec Row: K 1, * sl 1, K 2 tog, psso, P 1; rep from *, end K 2 tog.
Next Row: Purl.
Cut yarn leaving a 14″ end. Thread end into tapestry needle and pull thru sts on needle. Draw tog tightly and secure. Sew back seam.

Top Trim: With Size 8 needles, cast on 20 sts, K 1 row, Bind off as to K. Fasten off, leaving a 6″ end. Sew ends tog to form circle. Sew to top of cap.

MITTENS

Cuff: With No. 8 needles, cast on 35(43) sts. Change to No. 6 needles. Work pat as on Scarf for 2(2 1/2)”, end with Pat Row 2. This
completes cuff.
Change to No. 8 needles.
Work 2 rows.
Thumb Gore – First Inc Row: Work 16(20) sts, place a marker on needle, inc 1 st in next st, K 1, inc 1 st in next st, place marker, work to end. Sl markers every row.
Next Row: Work to marker P 1, [ K 1, P 1 ] twice, pat to end.
2nd Inc Row: Work to marker, inc 1 st in next st, K 1, sl 1, K 1, inc 1 st in next st, pat to end.
Next Row: Work to marker, P 1, K 1, P 3, K 1, P 1, pat to end.
3rd Inc Row: Work to marker, inc, K 1,P 1,sl 1,P 1, K 1, inc, pat to end.
Next Row: Work to marker, K 1, P 1, K 1, P 3, K 1, P 1, K 1, pat to end.
4th Inc Row: Work to marker, inc, P 1, K 1, P 1, sl 1, P 1, K 1, P 1, inc, pat to end (11 sts between markers).
Next Row: Work 16(20) sts, remove markers, sl next 11 sts to double
strand of yarn to be held for thumb, cast on 3 sts on right needle, work last 16(20) sts to end.
Continue pat on 35(43) sts to 6 1/2(8)” from beg or 1/2″ less than desired length to top of fingers, ending on wrong side.

Shape Top: Same as Cap until 2nd Dec Row is completed.
Next Row: Purl.
Next Row: K 2 tog across row.
Cut yarn leaving an 8″ end. Thread end into tapestry needle and pull thru sts on needle. Draw sts tog tightly and secure. Sew side seam.

Thumb: Sl 11 sts from strand of yarn to No. 8 needle to work first row from right side.
Row 1: Join yarn at center of 3 cast on sts over thumb gore, pick up 1 st in next st, across sts on needles, P 1, K 1, P 1, K 1 , P 1 , sl 1 , P 1 , K 1 , P 1 , K 1 , P 1,pick up 1 st on first cast-on st above gore (13 sts).
Row 2: K 1, [P 1, K 1 ] twice, P 3, K 1, [P 1, K 1 ] twice.
Row 3: [ K 1, P 1 ] 3 times, sl 1, [P 1, K 1 ] 3 times.
Rep Rows 2 and 3 until thumb measures 2 1/2 (3)” from beg of thumb gore, end on wrong side.
First Dec Row: [K 1, K 2 tog] twice, sl 1, [K 1, K 2 tog] twice.
P 1 row.
Cut yarn and finish same as mitten.

Email this to someoneShare on FacebookShare on Google+Pin on PinterestTweet about this on TwitterDigg thisShare on StumbleUpon

Add a Comment

Your email address will not be published. Required fields are marked *