Materials Needed
Fine Baby or Fingering Weight Yarn, 4 skeins white
Rayon crochet thread 1 ball green
Crochet Hook size C – 2
Steel crochet hook size 7
A hairpin lace staple, 5/8 inch wide.
5 yards of green satin ribbon, 1/2 inch wide.

Check Your Gauge: 7 sc make 1 inch; 7 rows make 1 inch.

BLOCKING MEASUREMENTS:
Chest — 18 inches; Length from shoulder to lower edge — 11 inches.

SACQUE

BODICE — Hairpin Lace Strip
(Make 11) . . . With White yarn and plastic crochet hook, make a strip of hairpin lace, having 46 loops on
each side of staple. Break off.
Keeping all loops straight and using steel crochet hook, attach Rayon Crochet to first loop, sc in same loop, (ch 5, sc in next loop) 18 times; sc in next 8 loops, ch 2, sl st in last ch-5 made, ch 2, sc in next loop on hairpin lace, * ch 2, sl st in next ch-5 loop, ch 2, sc in next loop on hairpin lace.
Repeat from * across until all loops have been joined. Break off.

To Join Strips: Keeping all loops straight and holding 2 strips of hairpin lace together, attach yarn to first loop on one strip, sc in first loop on second strip, * sc in next loop on first strip, sc in next loop on second strip.
Repeat from * until 20 loops have been joined. Break off.
Join next strip to opposite side of second strip the same way, leaving 6 loops free on rounded end.
Join remaining strips the same way.
Attach yarn to first free loop on end strip at Bodice top, sc in same place, * ch 2, sc in next loop. Repeat from * across to within last 6 loops. Break off. Work opposite end the same way.
Attach yarn to first ch-2 sp, 2 sc in each ch-2 sp across, 4 sc in each loop on rounded end of each hairpin
lace strip, 2 sc in each sp across other side, sc closely across straight edge. Join and break off.

Yoke . . . Starting at neck with White and size C hook, ch 89-
1st row: 2 tr in 7th ch from hook, * ch 1, skip 1 ch, tr in next ch, ch 1, skip 1 ch, 2 tr in next ch. Repeat from * across, ending with tr in last ch. Ch 1, turn.
2nd row: Sc in each tr and in each sp across, ending with sc in last tr, sc in next 2 ch. Ch 1, turn.
3rd row: Sc in first 18 sc, 2 sc in next sc—1 sc increased—(front), sc in next 17 sc, 2 sc in next sc(armhole), sc in next 30 sc, 2 sc in next sc (back), sc in next 17 sc, 2 sc in next sc, sc in each remaining sc. Ch 1, turn.
4th to 16th rows incl: Sc in each sc across, increasing over previous increases on each row. Ch 1, turn.
At end of 16th row, join to Bodice of sacque as follows:
Sc in first sc on yoke, ch 3, sc in first sc on straight edge of Bodice.* ch 3, skip 2 sc on yoke, sc in next sc, ch 3, skip 2 sc on Bodice, sc in next sc. Repeat from * across front of yoke, ending with sc in last sc on yoke, ch 3, skip 2 sc on bottom, sc in next sc, ch 3, leaving armhole section free, sc in first sc on back of yoke and continue to work in pattern across back and other side of front. Break off.

Sleeve . . . Make a strip of hairpin lace, having 41 loops on each side of staple. Attach Rayon to first loop, sc
in same loop, (ch 5, sc in next loop) 16 times; sc in next 8 loops, ch 2, sl st in last ch-5 loop, ch 2, sc in next loop on hairpin lace. Continue to work in pattern until all loops have been joined. Break off.
Make 4 more strips the same way.
Join strips as before, leaving 3 loops free on rounded end of each strip.
Join last strip to first strip.
Attach yarn to straight edge and sc closely around. Join and break off.
Attach yarn to armhole of sacque and join sleeve as Bodice was joined to yoke.

Cuff … 1st rnd: Attach yarn to first free loop on any strip, make 3 sc in each loop around. Join.
2nd to 5th rnds incl – Sc in each sc around, decreasing 2 sc evenly on each rnd— to dec 1 sc work off 2 sc as 1 sc.
6th rnd: Sl st in each sc around. Join and break off. Make other sleeve the same way.
Attach yarn to first sc on Right Front (following scallop) and sc closely across front, neck and other side of
front. Break off.
With wrong side facing, attach yarn to first sc on neck edge, sc in same place, * ch 3, skip 1 sc, sc in next sc. Repeat from * across. Ch 1, turn.
Next row: 5 sc in each loop across. Break off.

CAP . . . Make a strip of hairpin lace, having 29 loops on each side of staple. Break off.
Attach Rayon to first loop, sc in same loop, (ch 5, sc in next loop) 10 times; sc in next 8 loops, ch 2, sl st in last ch-5 loop made, ch 2, sc in next loop on hairpin lace.
Continue to work in pattern until all loops have been joined. Break off.
Make 5 more strips the same way. Join strips as before, leaving 6 loops free on rounded end of each strip. Attach yarn to first free loop on end strip, 2 sc in same loop and in each loop to within last 6 loops on strip, 4 sc in each loop on rounded end of each strip, ending with 4 sc in each of 6 loops on last strip, 2 sc in each remaining loop, sc closely across straight edge. Break off.

Back of Cap . . . Starting at center with White, ch 2.
1st rnd: 6 sc in 2nd ch from hook.
2nd rnd: 2 sc in each sc around.
3rd rnd: * 2 sc in next sc, sc in next sc. Repeat from *around.
Inc 6 sc evenly on each rnd until piece measures 3 1/2 inches in diameter. Join and turn.
Next rnd: Sc in each sc around, increasing 6 sc evenly around. Join and turn.
Repeat last rnd 3 more times.
Join back to hairpin lace as before, leaving 2 inches free on back. Break off.
Attach yarn to lower edge at front and sc closely across neck edge. Ch 1, turn.
Next row: Sc in each sc across. Break off.

Cuff . . . 1st row: Fold scallops back 1 1/4 inches, attach yarn and, working through both thicknesses, sc
closely across. Ch 3, turn.
2nd row: DC in next sc, * ch 1, skip 1 sc, dc in next sc, ch 1, skip 1 sc, dc in next 2 sc. Repeat from * across. Ch 1. turn.
3rd row: Sc in each dc and in each sp across, sc in top of turning chain. Ch 1, turn.
4th row: Sc in each sc across. Ch 1, turn. Sc in each sc across front and across neck. Join and
break off.
Lace a piece of ribbon through spaces on cuff. Sew ends securely. Cut 2 pieces of ribbon, each 12 inches long. Sew in place for ties. Cut remaining ribbon in half and make a rosette for each side of Cap. Sew rosettes in place.

Materials Needed
Baby, Fingering or Sock Weight Yarn approx 5 skeins White; a few yards of Pink and Blue.
Crochet Hook size E or size to give gauge
1 yard white satin ribbon, l/2 inch
wide.

Check Your Gauge!: 8 tr make 1 inch; 5 bar rows make 2 inches.

BLOCKING MEASUREMENTS:
Chest — 18 inches; Length from shoulder to lower edge — 11 inches.

SACQUE . . . Starting at Right Front make a chain 10 inches long.
1st row: Tr in 5th ch from hook and in each ch across until row measures 8 inches. Cut off remaining chain. Ch 1, turn.
2nd row: Sc around bar of first tr, sc around bar of each tr across. Ch 4, turn.
3rd row: Skip first sc, tr in each sc across. Ch 1, turn.
Repeat 2nd and 3rd rows alternately 3 more times, then repeat 2nd row once more. At end of last row ch 10, turn. Tr in 5th ch from hook, in each ch and in each sc across. Ch 1, turn.
Next row: Repeat 2nd row.
Continue to work in pattern until piece measures 4 inches in all
ending with a tr row. Ch 1, turn.

To Shape Armhole: Work in pattern to within last 25 tr. Ch 4, turn. Continue to work in pattern for 4 more rows. Ch 28, turn.
Next row: Tr in 5th ch from hook, tr in each ch and in each sc across. Continue to work in pattern until Back measures 9 1/4 inches beyond armhole shaping, ending with a tr row. Continue to work in pattern,
shaping other armhole and other front to correspond, ending with a tr row.

Border . . . 1st row: Sc closely across bottom and along opposite side of starting chain. Ch 1, turn.
2nd row: Sc around bar of each sc across front and bottom, then sc around bar of each tr across other side of front. Ch 4, turn.
3rd row: Skip first sc, tr in each sc around, making 5 tr in each corner. Ch 1, turn.
4th row: Sc around bar of each tr. Ch 1, turn.
5th row: Sc in each sc around. Break off. Sew up shoulder seams.

Sleeve . . . Starting at long side of Sleeve, make a chain 7 inches long.
1st row: Tr in 5th ch from hook and in each ch across until row measures 5 1/4 inches. Cut off remaining chain. Ch 1, turn.
Work in pattern until piece is long enough to reach around armhole. Break off. Sew up sleeve seam. Sew in Sleeve.

Cuff . . . 1st rnd: Attach yarn to edge of Sleeve, ch 4, tr closely around, drawing it in to fit. Join and turn.
2nd rnd: Sc around bar of each tr. Join and turn.
3rd rnd: Ch 4, tr in each sc around. Join and turn.
4th rnd: Repeat 2nd rnd.
5th rnd: Sc in each sc around. Join and break off.
Work other Sleeve the same way.

Collar . . . 1st row: Attach yarn 3/4 inch from edge at neck, sc closely
across to within 3/4 inch at other side. Ch 1, turn.
2nd and 3rd rows: Sc in each sc across. Ch 1, turn. Ch 4 to turn at end of 3rd row.
4th row: Skip first sc, tr in each sc across. Ch 1, turn.
5th row: Sc around bar of each tr across. Ch 4, turn.
6th row: Skip first sc, tr in each sc across. Break off.

Now work around Collar as follows:
1st row: Attach yarn to Sacque at base of Collar on right side and sc closely around Collar, sl st in next st on Sacque. Ch 1, turn.
2nd row: Sc around bar of each sc, sl st in next st on Sacque. Turn. 3rd row: Tr in each sc across Collar, making 3 tr in each corner sc, sl st in next st on Sacque. Ch 1, turn.
4th row: Sc around bar of each tr, sl st in next st on Sacque. turn; sc in each sc around Collar, sl st in next st on Sacque. Break off.
Make 2 chains, each 6 inches long.
Sew a chain to each side of Collar, then make 2 small pompons and sew
one to each chain. Embroider running st and flowers on ribs as shown in
illustration, using scraps of Pink and Blue.

CAP . . . Starting at one side, ch 41.
1st row: Tr in 5th ch from hook and in each ch across. Ch 1, turn. Work in pattern until piece measures 4 inches, ending with an sc row (side piece), make a chain 4 1/2 inches long for back, tr in 5th ch from hook, in each ch and in each sc across. Ch 1, turn.
Continue to work in pattern until piece measures 8 inches, ending with a tr row. Ch 1, turn.
Sc in first 38 tr. Ch 4, turn.
Continue to work in pattern over these 38 sts to correspond with other side. Break off.
Pin back and sides in place, attach yarn to opening and sc closely across both sides.

Cuff . . . 1st row: Attach yarn to right side of front, sc closely across. Ch 1, turn.
2nd and 3rd rows: Sc in each sc across. Ch 1, turn. At end of 3rd row,
ch 4 to turn.
4th row: Skip first sc, tr in each sc across. Ch 1, turn.
5th row: Sc around bar of each tr. Ch 4, turn.
6th and 7th rows: Repeat 4th and 5th rows.
8th row: Sc in each sc across. Break off.

Neckband . . . Fold cuff back, attach yarn to bottom and, working through both thicknesses, sc closely across cuff and bottom of cap, drawing it in to fit. Ch 1, turn.
2nd to 8th rows incl: Sc in each sc across. Ch 1, turn. Break off at end of 8th row.
Embroider as before. Cut ribbon in half. Make 2 pompons and sew a pompon and a piece of ribbon to each side of Cap.

BOOTEES—Sole . . . Starting at center, ch 22.
1st rnd: 3 sc in 2nd ch from hook, sc in each ch across, 3 sc in last ch; working along opposite side of starting chain make sc in each ch
across.
2nd rnd: Mark center sc on each side, sc in each sc to first marker,
increasing 3 sc on rounded end, dc in each sc to next marker, increasing 3 dc on other rounded end.
3rd and 4th rnds: Sc in each sc and dc in each dc around, increasing over rounded ends as necessary to keep work flat. Join and break off at end of 4th rnd.

Tongue . . . Starting at one side, ch 27.
1st row: Tr in 5th ch from hook and in each ch across. Ch 1, turn.
2nd to 5th rows incl: Work in pattern. At end of last row, sc closely around. Join and break off.

Instep . . . Attach yarn to back loop of center sc on side of Tongue, ch 38, sl st in back loop of corresponding sc on opposite side, sc in back loop of each sc around bottom half of Tongue, sc in each ch around.
2nd to 7th rnds incl: Sc in each sc around. At end of 7th rnd, join and break off.

Cuff . . . 1st row: Attach yarn to opposite side of starting chain on Instep, sc in each ch around. Ch 4, turn.
2nd row: Skip first 2 sc, * dc in next sc, ch 1, skip 1 sc. Repeat from *
across, ending with dc. Ch 4, turn.
3rd row: Skip first dc, tr in each sp and in each dc across, tr in top of
turning chain. Ch 1, turn.
4th row: Sc around bar of each tr across. Ch 4, turn.
5th row: Skip first sc, tr in each sc across. Ch 1, turn.
6th to 9th rows incl: Repeat last 2 rows 2 more times.
10th row: Repeat 4th row.
11th row: Sc in each sc across. Break off.

Sew Cuff to Tongue. Attach yarn to Tongue and sc closely around. Join
and break off. Embroider Tongue.
Make a chain 8 inches long. Lace through ch-1 sps on Cuff and tie into
a bow on side. Make 2 small pompons and sew one to each end of chain.

Materials Needed -
Sport or Baby Weight Yarn – 10 -12 skeins baby blue
1 pair knitting needles size 4 or size to give gauge
4 yards of blue satin ribbon, 2 inches wide
2 1/2 yards of blue satin ribbon, 3/8 inch wide
a 14-inch zipper (for neck opening),

Check Your Gauge!: 6 1/2 sts make 1 inch; 9 rows make 1 inch.

Starting at bottom, cast on 239 sts.
Work in pattern as follows:
1st row: * K 3, p 1. Repeat from * across to last 3 sts, k 3.
2nd row: * P 3, k 1. Repeat from * across to last 3 sts, p 3.
3rd row: * Sl 1 as if to purl, k 2, pass slipped st over the 2 knitted sts, p 1.
Repeat from * across to last 3 sts, sl 1 as if to purl, k 2, pass slipped st over the 2 knitted sts.
4th row: * P 2, k 1.
Repeat from * to last 2 sts, p 2.
5th row: Inc 1 st in first st, k 1, * p 1, inc 1 st in next st, k 1. Repeat from * across.
6th row: * P 3, k 1. Repeat from * across to last 3 sts, p 3.
The last 4 rows (3rd to 6th rows incl) constitute the pattern. Work in pattern until piece measures 17 1/2 inches in all, ending with right side facing.

REVERES . . . Now work in pattern for Reveres as follows:
1st and 2nd rows: K 1, p 1, work in pattern to last 2 sts, p 1, k 1.
3rd and 4th rows:(K 1, p 1) twice; work in pattern to last 4 sts, (p 1, k 1) twice.
5th and 6th rows: (K 1, p 1) 3 times; work to last 6 sts, (p 1, k 1) 3 times.
Work in this manner, having 2 sts more in moss st at front edges every other row until there are 36 sts in moss st.
Now work 1 st more in moss st every other row until there are 60 sts on each Revere in moss st.
Work in pattern as established until piece measures 27 inches in all. Bind off.

BOTTOM . . . Cast on 15 sts and work in moss st as follows:
1st row: * K 1, p 1. Repeat from * to last st. k 1 (moss st).
Now work in moss st, increasing 1 st at both ends of every other row until there are 45 sts on needle. Work without increasing until piece measures 6 1/2 inches from last inc row.
Still working in moss st, dec 1 st at both ends of every other row until 15 sts remain. Bind off.

HOOD . . . Starting at lower edge, cast on 147 sts.
Work in pattern as for Bunting until piece measures 5 inches in all.
Bind off 25 sts at the beginning of next 2 rows.
Next row (beading): K 1, *yarn over, k 2 tog. Repeat from * across. Following row: P across.
Now work in moss st over the remaining 97 sts, until piece measures
6 inches from first moss st row. Bind off 4 sts at the beginning of each row until 1 st remains. Bind off.

Bind front and upper edge of Bunting with wide ribbon, mitering corners.
Sew bottom to lower edge. Sew in zipper, leaving 10 1/2 inches free at top.
Cut 2 pieces of narrow ribbon, 14 inches long, for ties and sew to each
side of front edge 2 inches above zipper. Sew up top seam of hood. Bind front of hood with wide ribbon.

Cut a 52-inch piece of narrow ribbon and draw through beading.
Note from Grandmother - this is an old pattern. Drawstring ribbons are no longer used on baby garments for obvious safety reasons. To avoid strangling hazards, please be sure to use an alternate method of closing the hood – velcro or snaps both work nicely. You can also attach ribbon ties to both sides of the front of the hood without drawing them through the beading. Keep the baby that you love, Safe!

With a crochet hook make a row of sc along free edges of hood. Sew lower edge of hood to inside of back of bunting 7 1/2 inches from top.

1. Little Flower Doily

2. Knit Two Color Doily (pdf)

3. Knitted Petals Doily

4. Knitted Lace Doily

5. Heirloom Doily (pdf)

6. Doilies Knit on Two Needles ( be sure to check the metric size for the needles on these old patterns – you’ll probably want to use a size 0 or 00 in our current sizes)

7. Georgian Lace Mat (pdf)

8. Another Knitted Lace Doily

9. The Knitted Doily (pdf)

10. Double Star Doily – knit in wedges and joined to form circle

11. Vintage TulipWreath Doily (try a modern size 00 needle)

12. Ulma Doily

13. Oma and Her Offsprings

Please – I had no idea how difficult it would be to come up with knit doily patterns. If you have one or if you know of some links, will you please leave me a comment so I can include it here? Thanks!

Visit more Thursday 13ers - click here

Materials Needed:
Crochet cotton – one ball each white, green, pink, yellow
Steel crochet hook #7 to make a doily approximately 8 inches in diameter

ROSE: With Yellow ch 5, join to form a ring, ch 5, dc in ring, * ch 2, dc in ring, repeat from * 3 times, ch 2, join in 3rd st of ch, cut thread. Attach Pink in loop, 1 sc, 5 dc, 1 sc in same space, * 1 sc, 5 dc, 1 sc in next loop, repeat from * 4 times, join.

NEXT RND: * Ch 5, sl s in back of work between next 2 petals, repeat from * 5 times.

NEXT RND: Over each loop work 1 sc, 7 dc, 1 sc, join.

NEXT RND: * Ch 7, sl st in back of work between next 2 petals, repeat form * all around.

NEXT RND: Over each loop work 1 sc, 2 dc, 5 tr c, 2 dc, 1 sc, join, cut thread. Work 9 more roses in same manner.

CENTER: With White ch 7, join to form ring, ch 1 and work 10 sc in ring, join.

2ND RND: Ch 3, 2 dc in same space keeping last loop of each dc on hook, thread over and pull through all loops at one time, * ch 3, cluster st in next sc (cluster st: 3 dc in same space keeping last loop of each dc on hook, thread over and pull through all loops at one time), repeat from * 8 times, ch 3, join.

3RD RND: * Ch 4, sc in next loop, ch 4, sc in next cluster st, repeat from * all around (20 loops).

4TH RND: Sl st into loop, * ch 4, sc in next loop, repeat from * all around ending with ch 1, dc in same space as beginning (this brings thread in position for next round).

5TH RND: Ch 3 (counts as part of 1st cluster st), cluster st in same space, * ch 4, sc in next loop, ch 4, cluster st in next loop, repeat from * all around ending with ch 4, sc in next loop, ch 4, join in 1st cluster st.

6TH RND: Sl st into loop, * ch 5, sc in next loop, repeat form * all around.

7TH RND: Sl st into loop, ch 3, cluster st in same space, * ch 5, 2 sc in next loop, ch 5, cluster st in next loop, repeat from * all around ending with ch 5, 2 sc in next loop, ch 5, join.

8TH RND: Sl st into loop, ch 1, 2 sc in same space, * ch 7, 2 sc in next loop, repeat from * all around ending with ch 3, tr c in 1st sc.

9TH RND: Ch 3, cluster st in same space, ch 5, cluster st in same space, * ch 1, 2 cluster sts with ch 5 between in next loop, repeat from * all around, ch 1, join, cut thread.

10TH RND: Attach Green in the ch 1 between cluster sts, ch 4, cluster st in next ch 5 loop, ch 1, sc in center st of any petal of rose, * ch 1, cluster st in same space on center, ch 4, sc in the ch 1 between next 2 cluster sts, ch 4, cluster st in next ch 5 loop, ch 1, sc in center st of next petal of same rose, ch 1, cluster st in same space on center, ch 4, sc in next ch 1 loop between next 2 cluster sts, ch 4, cluster st in next ch 5 loop, ch 1, join to center st of any petal of next rose, repeat from * until all roses are joined ending to correspond, join, cut thread.

LEAF: With Green ch 11, sc in 2nd st from hook, 1 sc in each of the next 8 sts of ch, 3 sc in last st, working on other side of ch, 1 sc in each of the next 8 sts.

2ND ROW: Ch 2, turn, working through back loop of sts only, skip 1 sc, 1 sc in each of the next 8 sc, 3 sc in next sc, 1 sc in each of the next 8 sc.

Repeat the 2nd row 5 times.

NEXT RND: Ch 1, turn, join to center st of 2nd free petal on right hand side of any rose (to join: drop loop from hook, insert in petal, pick up loop and pull through), skip 1 sc on leaf and working through back loop of sts only, 1 sc in each of the next 9 sc, join to center st of next free petal of same rose, sc in same space on leaf, join to center st of 1st free petal on left hand side of next rose, sc in same space on leaf, 1 sc in each of the next 8 sc, join to center st of next petal of same rose, ch 1, sc in next sc on leaf, cut thread. Work 9 more leaves joining between roses in same manner.